search by application & industry

How to Order – Group 22 Rotary Actuators

How to Order

Beck Group 22 drives are available in three basic models, and are furnished with a crank arm and rod end for linkage connection. The following instructions are intended to make it easy to specify and order Beck Group 22 drives. If questions arise concerning additional options or control modes, contact your Beck Sales Engineer.

All Beck drives are shipped fully calibrated to the customer specifications written into the equipment order. Complete instruction manuals are furnished with each drive order. Each Beck drive is also supplied with a customized wiring diagram.

1. Specify Full Model Number:

Specify which model is appropriate for your application:
2 2 – 3 0 9 – ____ (30–300 seconds)*
OR
2 2 – 4 0 9 – ____ (15–300 seconds)*
OR
2 2 – 8 0 9 – ____ (15–300 seconds)*
*Timing is configurable–choose desired speed from available range for factory configuration.
Field configuration of speed is also easily accomplished.
 

2. Provide the Following Additional Information:

a. Desired control input signal: 4-20 mA OR 1-5 Vdc
b. Desired operating voltage:

Model Number
Standard Operating Voltage
22-309
120 VAC, single phase, 50 or 60 Hz
22-409
208 VAC, three phase, 50 or 60 Hz
22-809
480 VAC, three phase, 50 or 60 Hz

Other voltage options are available. Please contact a Beck Sales Engineer to discuss your requirements or reference the Group 22 instruction manual.

c. Direction of rotation desired on increasing signal: Clockwise (CW) or
Counterclockwise (CCW).
d. Desired Digital Control Module (DCM): Local Interface or HART® compatible.

3. State Whether or Not Beck is to Supply Linkage.

4. Send Your Order Directly to:

Harold Beck & Sons, Inc.
11 Terry Drive
Newtown, PA 18940 USA

For applications assistance, contact a Beck Sales or Application Engineer
Phone: 215-968-4600
Fax: 215-860-6383
Email: sales@haroldbeck.com