Group 14 Linear Valve Actuators
How to Order
Beck Group 14 drives are available in two basic models, and are
furnished with custom hardware for valve connection. The following
instructions are intended to make it easy to specify and order Beck
Group 14 drives. If questions arise concerning additional options or
control modes, contact your Beck Sales Engineer.
All Beck drives are shipped calibrated to the customer specifications
written into the equipment order.
Complete instruction manuals are furnished with each drive order.
1. Determine Required Parameters
- Basic model number - 14-100 or 14-200
- Control option
- Thrust (pounds)
- Timing (seconds/inch)
- Number of auxiliary switches ( 2 or 4 )
2. Specify Full Model Number
Using the information above, fill out the full model number according to
the following formula:
3. Provide the Following Additional Information
- Desired control input signal
- Desired power (120 or 240 V, 60 or 50 Hz)
- Direction of rotation desired on increasing signal: Retract (RET) or
Extend (EXT)
- Desired optional control features
4. Provide the Following Information for Valve Applications:
a. Valve specification including:
- Manufacturer
- Size
- Style
- Materials of construction
b. Characteristics of flowing media.
c. Maximum, normal and minimum inlet pressure.
d. Maximum, normal, minimum and shutoff pressure drop.
e. Maximum, normal and minimum flow rate and direction.
f. Line size and schedule including flange requirements.
5. Send Your Order Directly to
Harold Beck & Sons, Inc.
11 Terry Drive
Newtown, PA 18940 USA
For applications assistance, contact a Beck sales or application engineer
Phone: 215-968-4600
Fax: 215-860-6383
E-mail: sales@haroldbeck.com
|
