Group 29 Linear Valve Actuators
How to Order
Beck Group 29 drives are furnished with custom hardware for valve
connection. The following instructions are intended to make it easy to
specify and order Beck Group 29 linear valve actuators. If questions
arise concerning additional options or control modes, contact your Beck
Sales Engineer.
All Beck drives are shipped calibrated to the customer specifications
written into the equipment order.
Complete instruction manuals are furnished with each drive order.
1. Select your model number based on your desired mode of operation
- Modulating Operation - Model 29-109
- Open/Close Operation - Model 29-103
2. Provide the Following Additional Information
- Desired control input signal
- Desired power (120 or 240 V, 60 or 50 Hz)
- Direction of operation desired on increasing signal:
Retract (RET) or Extend (EXT)
3. Provide the Following Information for Valve Applications:
a. Valve specification including:
- Beck-supplied or Customer-supplied
- Manufacturer
- Size
- Style
- Materials of construction
b. Characteristics of flowing media.
c. Maximum, normal and minimum inlet pressure.
d. Maximum, normal, minimum and shutoff pressure drop.
e. Maximum, normal and minimum flow rate and direction.
f. Line size and schedule including flange requirements.
4. Send Your Order Directly to
Harold Beck & Sons, Inc.
11 Terry Drive
Newtown, PA 18940 USA
For applications assistance, contact a Beck sales or application engineer
Phone: 215-968-4600
Fax: 215-860-6383
E-mail: sales@haroldbeck.com
|
