Group 11 Quarter-Turn Rotary Actuators

General Specifications

Input Power 120 V ac, single-phase 240 V ac, single-phase Operating Conditions -40° to 85° C. (-40° to 185° F.), 0% to 99% relative humidity Isolation Demand Input and Position Feedback signals are isolated from the ground and the ac power line. Action on Loss of Power Stays in place. Action on Loss of Input Signal (Power On) Stays in place or, on some drives, is field configurable to move to any preset position. Limit Switches Two SPDT switches (one for each direction of travel) provide over-travel protection. Auxiliary Switches Up to four 6 A, 120 V ac switches available. Switches are labeled S1 to S4 and are cam-operated and field-adjustable. Handswitch Permits local electrical operation, independent of controller signal. Standard on all units. An optional auxiliary contact can be used to indicate that the Handswitch is in "AUTO" mode or to sound an alarm if it is taken out of "AUTO". Modulating Control
	Digital Control Module (DCM)	Electronic Signal Receiver (ESR)	Direct AC
Input Signal Options	See Control Option 9	See Control Option 7 & 8	N/A
Adjustability for Split Range Operation	4 to 1	2 to 1	N/A
Deadband	0.6% of span (configurable)	0.6% of span	N/A
Minimum Step	0.1% typical	0.15% typical	0.1° function of control system capabilities
Feedback Options	See Control Option 9	See Control Option 7 & 8	See Control Option 5 & 6
Stall Protection (Protects drive and driven elements under stall conditions)	Standard. Integral to electronics. Time to stall is configurable from 300 seconds down to 30 seconds.	Optional. Requires a Stall Protection Module (SPM) to shut off power to the motor.
Note: (1) Models approved for use in Hazardous classified locations are available—contact a Beck Sales or Application Engineer for details.